Ramani Steel House

Pure nickel strips for Spot Welding in Batteries.
ASTM 162 NICKEL 200 / 201

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Standard Export Packing

Pure Nickel Strips for Spot Welding in Li-ion Batteries.
Thickness : 0.20mm
Width : 10mm

Additional Information:

• Item Code: 32650-3P
• Delivery Time: 7-10 DAYS
• Packaging Details: STANDARD EXPORT PACKING

Pure Nickel Strip for 26650 Cell.
Thickness : 0.12mm - 0.30mm Thick
MOQ : 15 kgs
Grade : Nickel 200
MADE IN INDIA

Additional Information:

• Delivery Time: 7-10 Days
• Packaging Details: Standard Export Packing

Nickel 201 is a commercially pure nickel alloy, and it is widely used for its excellent corrosion resistance and good mechanical properties, especially in high-temperature applications. When you refer to Nickel 201 Strip, the specifications typically include key properties, dimensions, and chemical composition. Below are the common specifications for Nickel 201 Strip:

• Nickel (Ni): 99.0% minimum
• Iron (Fe): ≤ 0.4%
• Copper (Cu): ≤ 0.25%
• Manganese (Mn): ≤ 0.35%
• Silicon (Si): ≤ 0.35%
• Carbon (C): ≤ 0.02%
• Sulfur (S): ≤ 0.01%
• Phosphorus (P): ≤ 0.015%

Nickel 201 has a very low content of impurities, especially iron and copper, which makes it particularly resistant to oxidation and corrosion.

• Tensile Strength: Approximately 50,000 to 75,000 psi (345 to 515 MPa) (varies depending on the temper and processing)
• Yield Strength: Approximately 30,000 to 50,000 psi (205 to 345 MPa) (depending on the form and condition)
• Elongation: Around 30% in 2 inches (50.8 mm)
• Hardness: 65-75 Rockwell B (depending on temper)

• Thickness: Typically ranges from 0.005" (0.127 mm) to 0.1875" (4.76 mm), but custom dimensions are also available.
• Width: Can vary widely, typically from 0.5" (12.7 mm) to 24" (610 mm) or more.
• Length: Varies, but standard lengths range from coils to sheets or cut-to-length pieces.

Nickel 201 strip can be annealed or cold worked depending on the desired mechanical properties.

• Annealing Temperature: Usually between 1,400°F (760°C) and 1,550°F (850°C).
• Cold Working: After cold working, the material typically has increased strength but reduced ductility.

• Used in industries like chemical processing, aerospace, and marine environments.
• Common in applications like heat exchangers, reactors, and as a lining material for tanks and piping systems.
• Suitable for use in acidic environments, especially sulfuric acid and hydrochloric acid.

• Excellent resistance to corrosion in alkaline and neutral salt solutions.
• Resists stress corrosion cracking in chloride solutions and is resistant to corrosion by many organic and inorganic chemicals.

• Coil
• Sheet
• Strip
• Foil

Nickel 201 Strip is available in various finishes and tempers, including cold rolled, hot rolled, and annealed.

Nickel 201 is typically produced to meet the following standards:

• ASTM B162: Standard Specification for Nickel 201
• ASTM B170: Standard Specification for Nickel Plate, Sheet, and Strip
• UNS N02201: Unified Numbering System (UNS) designation for Nickel 201.

Would you like more specific details about one of these properties, or do you need a particular size or product form?

Additional Information:

• Production Capacity: 500
• Delivery Time: 2 - 3 Days
• Packaging Details: Packing In Coil Format

Pure Nickel Strip for 26650 Cell.
Thickness : 0.12mm - 0.30mm Thick
MOQ : 15 kgs
Grade : Nickel 200
MADE IN INDIA

Additional Information:

• Delivery Time: 7-10 DAYS
• Packaging Details: Standard Export Packing

Additional Information:

• Item Code: 32700FUSENICKEL
• Production Capacity: 100 kgs per Day
• Delivery Time: 7 days
• Packaging Details: EXPORT PACKING

Additional Information:

• Delivery Time: 1 day