Ramani Steel House

Nickel Alloys Round Bar refers to bars made from nickel-based alloys, which are designed to provide superior resistance to heat, corrosion, and oxidation. These alloys are used in harsh environments such as chemical processing, aerospace, and marine applications due to their outstanding mechanical properties at high temperatures.

Here’s an overview of Nickel Alloys Round Bars and their specifications.

1. Common Nickel Alloys and Their Specifications: Nickel 200 (UNS N02200):

• Chemical Composition:
  • Nickel (Ni): 99.0% min
  • Iron (Fe): ≤ 0.4%
  • Copper (Cu): ≤ 0.25%
  • Manganese (Mn): ≤ 0.35%
  • Carbon (C): ≤ 0.02%
  • Sulfur (S): ≤ 0.01%
  • Phosphorus (P): ≤ 0.015%
• Mechanical Properties:
  • Tensile Strength: 50,000–75,000 psi (345–515 MPa)
  • Yield Strength: 30,000–50,000 psi (205–345 MPa)
  • Elongation: 30% in 2 inches (50.8 mm)
• Applications: Used in applications requiring good corrosion resistance to neutral and alkaline solutions, like chemical processing equipment.

Nickel 201 (UNS N02201):

• Chemical Composition:
  • Nickel (Ni): 99.0% min
  • Iron (Fe): ≤ 0.4%
  • Copper (Cu): ≤ 0.25%
  • Manganese (Mn): ≤ 0.35%
  • Silicon (Si): ≤ 0.35%
  • Carbon (C): ≤ 0.02%
  • Sulfur (S): ≤ 0.01%
  • Phosphorus (P): ≤ 0.015%
• Mechanical Properties:
  • Tensile Strength: 50,000–75,000 psi (345–515 MPa)
  • Yield Strength: 30,000–50,000 psi (205–345 MPa)
  • Elongation: 30% in 2 inches (50.8 mm)
• Applications: Used in industries like chemical processing, electronics, and food processing due to its good thermal and electrical conductivity.

Inconel 625 (UNS N06625):

• Chemical Composition:
  • Nickel (Ni): Balance (58.0% min)
  • Chromium (Cr): 20.0–23.0%
  • Molybdenum (Mo): 8.0–10.0%
  • Iron (Fe): 5.0% max
  • Niobium (Nb): 3.15–4.15%
  • Titanium (Ti): 0.4–1.0%
• Mechanical Properties:
  • Tensile Strength: 105,000–125,000 psi (725–860 MPa)
  • Yield Strength: 45,000–80,000 psi (310–550 MPa)
  • Elongation: 35% min
• Applications: Commonly used in aerospace, marine, and chemical processing industries for applications where resistance to high temperatures and corrosion are required, such as exhaust systems and reactor cores.

Inconel 718 (UNS N07718):

• Chemical Composition:
  • Nickel (Ni): Balance (50% min)
  • Chromium (Cr): 17.0–21.0%
  • Iron (Fe): 18% max
  • Molybdenum (Mo): 3.0–4.5%
  • Titanium (Ti): 0.65–1.15%
  • Aluminum (Al): 0.2–0.8%
• Mechanical Properties:
  • Tensile Strength: 140,000–170,000 psi (965–1,170 MPa)
  • Yield Strength: 120,000–160,000 psi (830–1,100 MPa)
  • Elongation: 15% min
• Applications: Used for critical applications in the aerospace industry (e.g., turbine blades, gas turbines), nuclear reactors, and high-performance gas engines.

Monel 400 (UNS N04400):

Additional Information:

• Production Capacity: 1000
• Delivery Time: 2 - 3 Days
• Packaging Details: Standred Packing

Nickel alloy Bars are commonly used in various applications due to their excellent corrosion resistance, high-temperature strength, and good mechanical properties.

Additional Information:

• Delivery Time: 1-2 Days
• Packaging Details: Proper Damage Proof Packing

Nickel alloys are commonly used in high-performance applications due to their excellent corrosion resistance, high-temperature strength, and resistance to oxidation. Below are some common specifications for nickel alloy rods:

1. Nickel 200

• Composition: Minimum 99% Nickel
• Mechanical Properties:
  • Tensile Strength: 55-75 ksi (380-520 MPa)
  • Yield Strength: 30-45 ksi (205-310 MPa)
  • Elongation: 40% (min)
• Applications: Chemical and food processing, electrical components, aerospace

2. Nickel 201

• Composition: Nickel (minimum 99.0%) with slight additions of carbon (0.02% max)
• Mechanical Properties:
  • Tensile Strength: 50-70 ksi (345-485 MPa)
  • Yield Strength: 25-40 ksi (170-275 MPa)
  • Elongation: 35% (min)
• Applications: For use in food processing, electrical, and chemical industries, where low carbon content is beneficial.

3. Inconel 600

• Composition: 72% Nickel, 14-17% Chromium, 6-10% Iron
• Mechanical Properties:
  • Tensile Strength: 85-115 ksi (585-790 MPa)
  • Yield Strength: 30-55 ksi (205-380 MPa)
  • Elongation: 30% (min)
• Applications: High-temperature industrial processes, aerospace, heat exchangers

4. Inconel 625

• Composition: 58% Nickel, 20-23% Chromium, 8-10% Molybdenum
• Mechanical Properties:
  • Tensile Strength: 120-150 ksi (830-1035 MPa)
  • Yield Strength: 50-100 ksi (345-690 MPa)
  • Elongation: 35% (min)
• Applications: High-stress environments such as marine, chemical processing, aerospace

5. Monel 400

• Composition: 63% Nickel, 28-34% Copper
• Mechanical Properties:
  • Tensile Strength: 70-90 ksi (485-620 MPa)
  • Yield Strength: 30-60 ksi (205-415 MPa)
  • Elongation: 30% (min)
• Applications: Marine environments, chemical processing, power plants

6. Hastelloy C276

• Composition: 57-72% Nickel, 14-16% Molybdenum, 14-16% Chromium
• Mechanical Properties:
  • Tensile Strength: 115-145 ksi (790-1000 MPa)
  • Yield Strength: 45-85 ksi (310-585 MPa)
  • Elongation: 30% (min)
• Applications: Chemical reactors, pollution control, high-temperature applications

General Specifications for Nickel Alloy Rods

• Diameter: Typically ranges from 0.125 inches (3 mm) to 3 inches (76 mm), but can be customized based on requirements.
• Length: Standard lengths can vary from 3 feet (914 mm) to 20 feet (6096 mm), or custom lengths can be provided.
• Surface Finish: Can be supplied with bright, polished, or rough finishes depending on the application.
• Standards: Common standards include ASTM B160, ASTM B166, ASTM B164, and AMS 4675.

Would you like more detailed information on a specific alloy or their applications?

Additional Information:

• Item Code: N02200
• Production Capacity: 1000
• Delivery Time: 2 - 3 Days
• Packaging Details: Damage Proof Packing

Summary of Hastelloy C-22 Pipe Properties:

• Corrosion Resistance: Excellent resistance to corrosion by acids, chlorides, and oxidative environments. Great for chemical processing, marine environments, and high-temperature applications.
• Temperature Resistance: Effective at temperatures up to 1,800°F (982°C).
• Mechanical Properties: High tensile strength (~70,000 – 95,000 psi) and yield strength (~30,000 – 60,000 psi).
• Weldability and Fabrication: Can be welded and fabricated, though machining is difficult due to high hardness.
• Applications: Widely used in chemical processing, marine, power generation, pharmaceutical industries, and more.
• Standards: Manufactured according to ASTM B622, ASTM B626, and ASME SB-622.

Hastelloy C-22 is an excellent choice for applications where both corrosion and temperature resistance are critical. It is well-suited to industries like chemical processing, aerospace, and marine, where long-term durability in aggressive environments is essential. If you need further details or specific size options, feel free to ask!

Additional Information:

• Production Capacity: 1000
• Delivery Time: 2 - 3 Days
• Packaging Details: standard Packing

Inconel is a family of austenitic nickel-chromium-based superalloys. Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
We Source Nickel Alloy Tubes in INCONEL Alloys 600, 601, 625, 718, 800, 825 etc.
Accompanied with 3.1 Mill Test Report or Lab Report, we aim to provide best quality products at reasonable prices.